| General Purpose Nozzles |
| NOZZLE |
CHARACTERISTICS |
APPLICATION |
| Flat Spray Nozzle |
Produces a flat fan shaped pattern with tapering edges Requites overlapping so as to produce an even
distribution in multiple nozzle system |
Degreasing, Foam Control, Industrial Washer, Spray coating Water misting, Metal
Cleaning-Rinsing -Washing |
| Straight Stream Nozzle |
Produces high velocity straight jet induces the surrounding liquid into the jet stream. |
Agitation, Mixing of Liquids, Cataphoresis Plants, Straight Stream Needle-Type Spray |
| Hollow Cone Nozzle |
Uniform distribution, Fine atomization, using direct pressure alone. Nominal
spray Angles of 40, 60 or 80 deg at moderate pressure. Finer atomization
with increase in pressure. |
Aerating Water, Brine Spray, Evaporative Condensation, Evaporative Coolers,
Industrial Washers, Spray Coating, Spray Ponds, Gas Scrubbing and washing, Gas Cooling, Cooling Towers, Humidification |
| Solid |
Precision, low capacity nozzle in a solid cone shape pattern. Uniform distribution of finely
atomized droplets. Pressure increase affect spray angle. |
Aerating Water, Humidification, Cooling Towers, Gas Scrubbing & washing, Brine Spray, Evaporative, Condensation, Industrial
Washers, Evaporative Coolers, Spray Ponds, Spray Coating, Gas cooling. |
| Air Atomizing |
Two Swirl-Air nozzle versions are available : the right angle nozzle (atomizing air enters the side, the liquid enters axially in back):
and the inline nozzle (concentric piping is used with the liquid in the center
and atomizing air around the outside). |
Chemical processing, continuous casting, cooling castings and moulds, curing concrete products, evaporative coolers, foam control, incineration
, quenching, spray coating, flue gas desulfurisation. |
| Cleaning in Place |
Relatively uniform distribution at all pressure, available in a range of flow capacities and produces a full spray
pattern from a multiple orifice body, with 360" spherical cover for tanks up to 3 mtrs in a diameter. |
Various types of fixed and rotating spray heads are specified in this section and are designed to suit a wide range of applications
and installations. |
| Delta Fit |
Produces a uniform, flat spray pattern with soft tapered edges to allow overlapping
for even distribution. Impact is generally greater
with narrower spray angles assuming equal flow rates. |
Delta-Fit is a unique system of quick fitting nozzles of various spray types which allows connection to pipework
without the use of spanners. |
|
