Application sheet for Gasketed Plate Heat Exchanger, Semi-Welded Plate Heat Exchanger
Personal Information
Customer Name
Address
Country
Phone
Email
Fax
1. PMS Gasketed Plate Heat Exchanger properties
Item
Warm Medium
Cold Medium
Unit
Medium
Heat Duty
KW
Flow Rate
M
3
/h
Temperature *Inlet
o
C
*Outlet
o
C
* Atleast three of these data per medium have to be indicated.
Pressure Drop (Max. allowed)
m bar
Surface Margin
%
Operating pressure at inlet
bar g
Design Pressure/
Design Temperature
bar g/
o
C
Test Pressure
Physical properties of medium
Density
kg/m
3
Specific Heat
J/K kg
Thermal conductivity
W/mK
Dyn Viscosity
At Inlet temp
kg/ms
At Outlet temp
kg/ms
2. Semi Welded Plate Heat Exchanger (Evaporator or Condenser)
2.1 Evaporator
Cooling Capacity
[KW]
Refrigerant
Cooled Media
Mass flow
[kg/s]
Volume Flow
[m
3
/h]
Evaporation Temp.
[
o
C]
Temperature Inlet
[
o
C]
Condensation Temp.
[
o
C]
Temperature Outlet
[
o
C]
Maximum Pressure Drop
[kPa]
Maximum Pressure Drop
[kPa]
Working Pressure
[bar]
Working Pressure
[bar]
Important Info!
Compressor Model
Displacement
[m
3
/h]
2.2 Condenser
Capacity
[kw]
Refrigerant
Cooling Media
Mass flow
[kg/s]
Volume inlet
[m
3
/h]
Hot gas temp. inlet
[
o
C]
Temperature Inlet
[
o
C]
Condensation Temp.
[
o
C]
Temperature Outlet
[
o
C]
Maximum Pressure Drop
[kPa]
Maximum Pressure Drop
[kPa]
Working Pressure
[bar]
Working Pressure
[bar]
Copyright © 2004 P.M.S Engineering (Intl.) Services. All rights reserved
Site Maintained by
Ayush Gupta